KAWAMOTO Package of Fire Fighting Pump

KTY

Product code: KTY

Application

Indoor fire hydrant
Outdoor fire hydrants
Sprinklers
Water spray fire extinguishing
Foam fire extinguishing
Fire department hydrants

Feature

Achieved downsizing (compared to our conventional products) of the package by special designing of the firefighting pump unit adopting the new technological standard in Japan.
Labor-saving and space-saving is possible for installation/inspection by locating the inspection/drain piping and the inspecting surface on the same side.
High performance and efficiency with satisfying all items of the new technical standard of Japanese firefighting regulation.
Easy maintenance and inspection due to totally packaged products according to the Firefighting law in Japan.

Standard spec

Liquid

Fluid quality: Clean water
Fluid temperature: 0~40°C (No freezing)

Materials

Impeller: Bronze
Shaft: SUS403
Casing: Cast iron

Motor

Type: TEFC indoor (18.5 kW or less), ODP (22kW or more)
Power source: Three phase
Speed: 50Hz: 1,500 min^-1, 60Hz: 1,800 min^-1

Installation location

Installation location: Indoor

Structure

Impeller: Closed
Shaft sealing: Gland packing
Bearing: Closed ball bearing, Angular contact ball bearing

Flange figure

Flange figure: JIS10K thin type or standard type (Dis. in High head model: JIS 20K)

Coating color (Munsell No.)

Coating color (Munsell No.): Vermillion (7.5R4/14)

Standard Accessories

Escape orifice: with sluice valve (orifice dia.: 3mm)

Check valve

Sluice valve: with Indicator

Pipe for performance test: with Flow meter, Sluice valve

Pressure gage: Class 1.6 or more φ100

Compound gage: Class 1.6 or more φ100

Foot valve: In case KTGF

Companion flange: 1 set (excluding bore size 125mm model)

Suction cover: 1 set (in case with priming tank)

Connecting pipe

Flexible joint: made of stainless steel (approved by the Firefighting Equipment and Safety Center of Japan)

Priming tank: in case with priming tank Vol: 50L in bore size 150mm or less model, Vol: 100L in bore size 200mm model

Pressure tank for activation: in case with pressure tank for activation Vol: 50L in bore size 150mm or less model, Vol: 100L in bore size 200mm model

Control panel: ECKD type

Pump: with Motor shaft coupling, Coupling guard

Indoor/Outdoor Hydrant, Sprinkler

Bore	Ref.	Model	Motor	Stages	Total head (m) for 1 unit of type II indoor hydrant *	Total head (m) for 1 unit of type II wide range indoor hydrant *	Total head (m) for 2 units of type II indoor hydrant *	Total head (m) for 1 unit of type I indoor hydrant *	Total head (m) for 2 units of type II wide range indoor hydrant*	Total head (m) for 2 units of type I indoor hydrant *	Total head (m) for 1 unit outdoor hire hydrants	Total head (m) for 4 units of sprinkler for narrow range	Total head (m) for 8 units of sprinkler for narrow range	Total head (m) for 12 units of sprinkler for narrow range	Total head (m) for 8 units high-sensitive sprinklers	Total head at zero flow	Capacity of escape from orifice	Max. back pressure
mm	―	―	kW	―	70L/min	90L/min	140L/min	150L/min	180L/min	300L/min	400L/min	240L/min	480L/min	720L/min	720L/min	m	L/min	MPa
40	1	KTY405A4ME2.2	2.2	4	45	44	41	40	―	―	―	―	―	―	―	49	9.6	0.59
40	2	KTY405A5ME3.7	3.7	5	57.5	56	53	52	―	―	―	―	―	―	―	62	10.8	0.49
40	3	KTY405A6ME3.7	3.7	6	69	67	62	60.5	―	―	―	―	―	―	―	74	11.8	0.34
40	4	KTY405A7ME3.7	3.7	7	79	77.5	73	71.5	―	―	―	―	―	―	―	84	12.6	0.25
40	5	KTY405A8ME5.5	5.5	8	92	90	85.5	84	―	―	―	―	―	―	―	100	13.7	0.098
50	6	KTY505A4ME3.7	3.7	4	―	―	―	46	44.5	40	―	43	―	―	―	52	9.9	0.59
50	7	KTY505A5ME5.5	5.5	5	―	―	―	60.5	59	53	―	56.5	―	―	―	69	11.4	0.39
50	8	KTY505A6ME5.5	5.5	6	―	―	―	69.5	68	60	―	64	―	―	―	78	12.1	0.29
50	9	KTY505A7ME7.5	7.5	7	―	―	―	83	81	72	―	77	―	―	―	92	13.2	0.2
50	10	KTY505A8ME7.5	7.5	8	―	―	―	92	89.5	79	―	84.5	―	―	―	104	14	0.098
65	11	KTY655A3ME3.7	3.7	3	―	―	―	―	―	39	―	―	―	―	―	49	9.1	0.59
65	12	KTY655A3ME5.5	5.5	3	―	―	―	―	―	45.5	43.5	―	―	―	―	52	9.8	0.59
65	13	KTY655A4ME5.5	5.5	4	―	―	―	―	―	52.5	―	―	―	―	―	61	10.6	0.59
65	14	KTY655A5ME5.5	5.5	5	―	―	―	―	―	60	―	―	―	―	―	70	11.4	0.59
65	15	KTY655A4ME7.5	7.5	4	―	―	―	―	―	60	57.5	―	―	―	―	69	11.3	0.59
65	16	KTY655A5ME7.5	7.5	5	―	―	―	―	―	67	―	―	―	―	―	77	11.9	0.49
65	17	KTY655A6ME7.5	7.5	6	―	―	―	―	―	78	―	―	―	―	―	87	12.7	0.39
65	18	KTY655A5ME11	11	5	―	―	―	―	―	76	72	―	―	―	―	88.7	12.8	0.39
65	19	KTY655A6ME11	11	6	―	―	―	―	―	92	87	―	―	―	―	104	13.8	0.2
65	20	KTY655A7ME11	11	7	―	―	―	103	101.5	98	―	99.5	―	―	―	110	14.3	0.2
65	21	KTY655A8ME11	11	8	―	―	―	112	110	104	―	107	―	―	―	121	14.9	0.098
80	22	KTY805A4ME11	11	4	―	―	―	―	―	―	―	―	62	55.5	55.5	72	11.6	0.39
80	23	KTY805B5ME11	11	5	―	―	―	―	―	―	―	―	73	―	―	91	13	0.2
80	24	KTY805A4ME15	15	4	―	―	―	―	―	―	―	―	―	62.5	62.5	80.5	12.1	0.29
80	25	KTY805A5ME15	15	5	―	―	―	―	―	―	―	―	―	72.5	72.5	99	13.5	0.2
80	26	KTY805B6ME15	15	6	―	―	―	―	―	―	―	―	95	―	―	115	14.6	0.098
80	27	KTY805A7ME15	15	7	―	―	―	―	―	111	107	―	―	―	―	122	15	0.049
80	28	KTY805A6ME18	18.5	6	―	―	―	―	―	―	―	―	―	90	90	118	14.8	0.098
80	29	KTY805B7ME18	18.5	7	―	―	―	―	―	―	118	―	113	―	―	136	15.9	0.039

NOTE) Model name indicates base model. (exclude 7.5kW or less)

In the case of Package unit, add following character on the trailing of base model name.

Type II package unit (with control panel) - with Priming tank: T

Type II package unit (with control panel) - with Priming tank & Pressure tank: TP

Type II package unit (with control panel) - without Priming tank: F

Type II package unit (with control panel) -without Priming tank, with Pressure tank: FP

*Appropriate model for 1 pc of type 1 indoor hydrant + type 2 indoor hydrant (220L/min) and for 4 pcs of small area sprinkler is same.

Ref.	Parts	Material	Q'ty
1	Base	Steel	1
2	Pump		1
3	Key	S45C	1
4	Coupling	Cast iron	1
6	Bolt	SWRM10	4
7	Spring washer	SWRH57A	4
8	Motor		1
9	Coupling	(Cast iron)	1
10	Bolt	SWRM10	4
11	Spring washer	SWRH57A	4
12-1	Square shim	SUS301	4
12-2	Square shim	Galvanized steel	4
12-3	Square shim	Galvanized steel	4
12-4	Square shim	Galvanized steel	4
13	Coupling guard	Steel plate	1
14	Bolt with built in washer	(SWRM10)	2
19	Mounter	Steel	1
20	Bolt	SWRM10	4
21	Spring washer	SWRH57A	4
22	Plane washer	Steel plate	4
23	Priming tank	(Steel plate)	1
24	Spring washer	SWRH57A	4
25	Plane washer	Steel plate	4
26	Nut	SWRM10	4
27	Gasket	(EPDM)	1
28	Connecting pipe	SGP､SS400	1
29	Bolt	SWRM10	8
30	Nut	SWRM10	8
31	Gasket	(EPDM)	1
32	Piping		1
33	Bolt	SWRM10	4
34	Nut	SWRM10	4
35	Packing for rhombic flange	NR(A707)	1
36	Nut	SWRM10	2
37	Straight pipe	SGP-ZN	1
38	Piping		1
39	Gasket	(EPDM)	1
40	Connecting bend pipe		1
41	Bolt	SWRM10	4
42	Nut	SWRM10	4
43	Gasket	(EPDM)	1
44	Pipe with flow meter		1
45	Bolt	SWRM10	4
46	Nut	SWRM10	4
47	U-Bolt	Steel	1
48	Plane washer	Steel plate	2
49	Spring washer	SWRH57A	2
50	Nut	SWRM10	2
51	U-Bolt	Steel	1
52	Plane washer	Steel plate	2
53	Spring washer	SWRH57A	2
54	Nut	SWRM10	2
55	Gasket	(EPDM)	1
56	Hummer-less check valve		1
57	Bolt	SWRM10	8
58	Nut	SWRM10	8
59	Gasket	(EPDM)	1
60	Connecting pipe	SGP､SS400	1
61	Bolt	SWRM10	8
62	Nut	SWRM10	8
63	Straight pipe	SGP-ZN	1
64	Sluice valve	(Bronze)	1
65	Straight pipe	SGP-ZN	1

Ref.	Parts	Material	Q'ty
66	Elbow	FCMB 27-05	1
67	Straight pipe	SGP-ZN	1
68	Pressure tank		1
69	Straight pipe	SGP-ZN	1
70	Elbow	FCMB 27-05	1
71	Straight pipe	SGP-ZN	1
72	Union	FCMB 27-05	1
73	Bolt	SWRM10	3
74	Plane washer	Steel plate	3
75	Spring washer	SWRH57A	3
76	Nut	SWRM10	3
77	Straight pipe	SGP-ZN	1
78	Cock	(C3771)	1
79	Ring packing	Leather	1
80	Straight pipe	SGP-ZN	1
81	Male and female elbow	FCMB 27-05	1
82	Cock	(C3771)	1
83	Ring packing	Leather	1
84	Mounter	Steel	1
85	Bolt	SWRM10	4
86	Plane washer	Steel plate	4
87	Spring washer	SWRH57A	4
88	Nut	SWRM10	4
89	Control panel		1
90-1	Bolt	SWRM10	4
90-3	Plane washer	Steel plate	4
90-2	Spring washer	SWRH57A	4
91-1	Heat-resistant wire	(HIV)	1
91-2	Heat-resistant wire	(HIV)	1
92-1	Heat-resistant wire	(HIV)	1
92-2	Heat-resistant wire	(HIV)	1
93-1	Heat-resistant wire	(HIV)	1
93-2	Heat-resistant wire	(HIV)	1
94	Heat-resistant wire	(HIV)	1
95	Cable protective pipe		1
96	Box connector		2
98	Cord bush		2
99	Electrode		1
100	Heat-resistant wire	(VCTF)	1
101	Band	PA	1
102	Clamp	PA66, rubber	3
103	Nameplate	A1100P-H24	1
104	Drive screw	SUS304	4
105	Nameplate	A1100P-H24	1
106	Certificate		1
107	Drive screw	SUS304	4
108	Name label	PVC	1
109	Caution label	(Paper)	1
111	Indication label		1
112	Tag	(Paper)	1
113	Tag	(Paper)	1
114	Tag	(Paper)	1
115	Tag	(Paper)	1
116	Tag	(Paper)	1
117	Tag	(Paper)	2
118	Tag	PVC	1
127	Mounting plate	Steel plate	2
129	Cover	Polyester	1
130	Cover	Polyester	1
200	Cup point set screw	SCM435	1
200	Cup point set screw	SCM435	1
201	Adhesive		1

Read now

Related Products

DPK

Package Jockey Pump Major Application : Firefighting Max. bore (Suc. x Dis.):15mm Max. Q: 0.02m3/min (5 GPM) Max. H: 280m (915 feet)

KTGF/KTGDF

Package Large Capacity Fire-Fighting Pump Major Application: Firefighting Max. bore (Suc. x Dis.): 200 x 150 mm Max. Q: 8m3/min (2113 GPM) Max. H: 92m (300 feet)

KTK-M

Package High Pressure Fire-Fighting Pump Major Application: Firefighting Max. bore (Suc. x Dis.): 80 x 65 mm Max. Q: 0.9m3/min (237 GPM) Max. H: 200m (653 feet)

KTK-C

Package Compact Fire-Fighting Pump Major Application: Firefighting Max. bore (Suc. x Dis.): 100 x 65mm Max. Q: 0.9m3/min (237 GPM) Max. H: 110.5m (361 feet)

KTK 100M

Package Fire-Fighting Pump Major Application: Firefighting Max. bore (Suc. x Dis.): 125 x 100 mm Max. Q: 1.8m3/min (475 GPM) Max. H: 108.5m (354 feet)